Cequent Performance Products 75952 Instrucciones De Instalación página 4

1. Scrape frame rails to remove any undercoating.
2. Run the M12 bolts into existing weldnuts in frame rail to remove any
debris. Remove bolts.
3. Raise hitch into position, aligning slots in hitch side brackets with
existing weldnuts in vehicle frame rail. Install M12 bolts and conical
toothed washers as shown. Tighten all M12 CL10.9 fasteners with
torque wrench to 75 Lb.-Ft. (102 N*M)
©2015 Cequent™ Performance Products, Inc. - Sheet 4 of 12 75952NP 1-22-15 Rev. A
Printed in Mexico