Publicidad
Enlaces rápidos
a
d
f
i
b
j
c
e
g
h
k
4' Closet Organizer
Installation Instructions
Organizador de closet de 1,22 m
Instrucciones de instalación
Before You Begin
1. Remove product from packaging and carefully inspect all
parts. (See Parts List below.)
2. Please read all instructions carefully before beginning.
Antes de empezar
1. Remueva el producto del paquete y cuidadosamente
inspeccione todas las partes. (Vea la lista de partes
abajo).
2. Haga el favor de leer todas las instrucciones
cuidadosamente antes de empezar.
Parts List
a. SuperSlide Shelves (2) 02-45640
b. 48" Standards (3) 01-28044
c. Shelf Brackets (6) 02-42853
d. 40" Hang Track (1) 01-28266
e. SuperSlide Bar Supports (6) 01-856
f. 4' Hanger Bars (2) 01-682
g. Hanger Bar End Caps (4) 01-684
h. Shelf End Caps (16) 01-603
i. 3/16" Toggle Bolts (8) 01-270/01-274
j. #12 x 2" Pan Head Screws (8) 01-688
k. 1/4" Anchors (8) 01-650
Lista de partes
a. Repisas SuperSlide™ (2) 02-45640
b. Rieles Verticales de 1,22 m (3) 01-28044
c. Soportes de Repisa (6) 02-42853
d. Riel Horizontal de 1 m (1) 01-28266
e. Soportes para Barra Colgadora SuperSlide™ (6)
01-856
f. Barra Colgadora de 1,22 m (2) 01-682
g. Tapones para Barra Colgadora (4) 01-684
h. Tapones para Repisa(16) 01-603
i. Pernos de Palanca de 4,7 mm(8)
01-270/01-274
j. Tornillos de Cabeza Redonda #12 x 5 cm (8)
01-688
k. Tarugos de 6 mm (8) 01-650
#2889
4' (1,22 m)
TM
Publicidad
Manuales relacionados para ClosetMaid 2889
Resumen de contenidos para ClosetMaid 2889
- Página 1 #2889 4' (1,22 m) 4' Closet Organizer Installation Instructions Organizador de closet de 1,22 m Instrucciones de instalación Before You Begin 1. Remove product from packaging and carefully inspect all parts. (See Parts List below.) 2. Please read all instructions carefully before beginning.
- Página 2 Tools and Materials Herramientas y materiales 1/4" (6 mm) Measure and Fit NOTE: This closet organizer requires a minimum wall area of 4'. It can also easily be installed in closets wider than 4'. However, in the case of closet wall areas which are smaller than 4', the Hang Track and/or the Shelves will require cutting.
- Página 3 Install Hang Track DRYWALL MURO SECO To install Hang Track into drywall: IMPORTANT: For 1. Drill 1/2" holes at marked locations on wall. optimum performance, 2. Remove toggle from bolt. Insert bolt through hole in Hang align holes 1, 3, and 5 Track and re-install toggle onto end of bolt.
- Página 4 1-800-874-0008 (U.S.A and Canada) with manufacturer's instructions, it will be www.closetmaid.com exchanged free of charge. Only the unsatisfactory part in a multi-piece product will be exchanged. © ClosetMaid Corporation 2002 Manufacturer reserves the right to change 01-84716 Printed in U.S.A. specifications without notice.