Intended Use; Assembly And Adjustments - DeWalt DCG412 Manual De Instrucciones

NOTE: Battery packs should not be stored completely depleted of
charge. The battery pack will need to be recharged before use.
SAVE THESE INSTRUCTIONS
FOR FUTURE USE
DESCRIPTION (FIG. 2, 9)
WARNING: Never modify the power tool or any part of it. Damage or
personal injury could result.
A. Trigger switch
B. Lock-off button
C. Spindle lock button
D. Spindle (Fig. 9)
E. Side handle
F. Grinding wheel [4-1/2"
(115 mm/(5"/125 mm)]

INTENDED USE

The DCG412 cordless angle grinder has been designed for professional
cutting, light-duty material removal and wire-brush applications. DO
NOT use grinding wheels other than centre depressed wheels and flap
discs.
DO NOT use under wet conditions or in presence of flammable liquids
or gases.
This heavy-duty angle grinder is a professional power tools. DO NOT let
children come into contact with the tool. Supervision is required when
inexperienced operators use this tool.
G. Unthreaded backing flange
(Fig. 9)
H. Threaded locking flange
(Fig. 9)
I. Type 27 Guard [(5" (125 mm)]
J. Battery pack
FIG. 2
F
I
C

ASSEMBLY AND ADJUSTMENTS

WARNING: To reduce the risk of serious personal injury, turn tool
off and remove the battery pack before making any adjustments
or removing/installing attachments or accessories. An accidental
start-up can cause injury.
Attaching Side Handle (Fig. 2)
The side handle (E) can be fitted to either side of the gear case in the
threaded holes. Before using the tool, check that the handle is tightened
se cure ly.
To improve user comfort, the gear case will rotate 90° for cutting
operations.
61
B
J
A
E