Safety Instructions - SATA 02003 Manual Del Uso

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 100

1. Safety Instructions

Warning:
The definitions of "Warning" and "Caution" in the Operation Instructions are as follows:
Warning: Improper use may result in death or serious injury.
Caution: Improper use may result in injury of the user or substantial damage to the objects involved.
Note: The information described is important for the operation of the machine.
Caution:
When the power is turned on, the temperature of the soldering bit is high. Considering the possibility of scalding or
fire caused by misuse, strictly follow the requirements below:
1 ) Use this product in accordance with the Operation Instruction, and avoid misuse.
2) Use this product at rated voltage and frequency(see the label on the back of the machine).
3) Do not touch the soldering bit and the metal parts around it.
4) Do not use the soldering bit near flammable objects.
5) Inform others that the soldering bit is likely to cause burns and dangerous accidents. Turn off the power
before resting or after work.
6) When replacing the parts or the soldering bit, turn off the power and cool the soldering bit down to room
temperature before replacement.
7) Check, maintain and repair this product regularly. Do not use this product when it is damaged, especially when
the power cord is damaged.
8) This product is provided with a three-wire grounding plug, which shall be plugged into a three-pin earthing
socket. Do not modify the plug or use an ungrounded three-pin adapter, so as to avoid improper grounding.Use
grounded three-wire power cords to extend the wire.
9 ) Do not knock the station with the soldering iron handle to remove residual flux, as this may severely damage
the handle assembly and the soldering bit.
10) Do not use the soldering bit for other works than soldering.
11) Do not wet the soldering station. Do not use and disassemble the soldering station or pull the power cord when
your hands are wet.
12) Equip the workshop with good ventilation facilities because smoke will be produced during soldering.
13) Do not modify the soldering station without authorization. Always use original parts for replacement.
14) Do not use or store this product within the reach of children.
02003
中文
EN
DE RU KO PT
JA
ES
17

Publicidad

Tabla de contenido
loading

Tabla de contenido