Installation And Connection; Soldering Iron Stand And Brass Wool; Connection - SATA 02003 Manual Del Uso

4. Installation and Connection

Caution:
Before installing the soldering station, check whether the power supply voltage used is the same as the rated voltage
on the nameplate.
Connect the soldering iron handle

4. 1 Soldering Iron Stand and Brass Wool

1 ） Place the soldering iron handle on the soldering iron stand when not in use.
2） Use the brass wool to clean the soldering bit. Before cleaning, insert the soldering bit into the brass wool and gently
turn the soldering iron handle to remove the slag or oxides from the soldering bit.

4.2 Connection

Caution:
When installing or disassembling the soldering station, be sure to turn off the power switch and unplug the power
plug to avoid damaging the soldering station.
1 ） Plug the connecting plug of the soldering iron handle wire into the socket on the front of the soldering station in a
correct way.
2） Place the soldering iron handle on the soldering iron stand.
3） Plug the power plug into the three-terminal grounding socket with the appropriate voltage.
4） Turn on the power switch.
02003
Lead-free soldering station
Power switch
中文
EN
Soldering iron stand
Put the soldering iron handle here
Put the brass wool
DE RU KO PT JA ES
19