Publicidad
Clean the air filter:
Before the installation or replacement of nozzle, fully cool the equipment or use the appropriate tools.
Warning:
1 ）If any live element or connector is exposed after the equipment is powered on, it poses a risk to human life. Therefore, always check
that the power plug is removed from the socket before power on, and the power cord, the plug and the extension cable are free from
electric and mechanical damage.
2）The improper use of the hot air equipment may lead to fire and explosion, especially the use near flammables or explosive gases.
3）Mind the risk of scalding! Do not touch the hot heating pipe element and nozzle. Do not direct the cooling equipment or the hot air jet
at humans or animals.
Warning:
There is a risk of poisoning! Corrosive or poisonous gas may appear when you are processing the plastic, varnish or other
similar materials. Avoid inhaling any vapor even if it seems to be harmless. Keep the working area well-ventilated or wear the
gas mask
Caution :
1 ）The set rated voltage of the equipment must be in line with the power supply voltage.
2）During the use at the construction site, the residual current device must be adopted to ensure the personnel safety.
3）The equipment must be monitored during operation. Since the hot air may reach the flammables out of sight, the equipment can
only be operated by the trained personnel or under his supervision. No child is allowed to operate this equipment!
4）Pay attention to protect the equipment against moisture and dampness.
5）The repair work can only be conducted by SATA's cooperation partners. Only the original SATA accessories and parts may be used.
Warranty :
1 ） In principle, the warranty period of this equipment is 6 months from the date of purchase（the date of invoice or dispatch list is
taken as evidence）. In case of any damage, SATA will provide spare part or repair service. The heating element is not covered under
the warranty.
2）The warranty does not include other rights and claims on the premise that relevant laws and regulations are observed.
3）The equipment damage caused by natural loss, overloaded operation or misoperation is not covered under the warranty.
4）The equipment refitted or modified by the buyer is not entitled to any rights and claims.
10
97927
中文
EN
DE
RU
KO
PT
JA
ES
Publicidad
