Horizon Fitness CE 4.3 Manual Del Propietário página 12

ASSEMBLY STEP 3
TEFLON WASHERS (E)
FLAT WASHER (F)
BOLT (G)
LINK ARM BRACKET
SPACER (D)
LOWER LINK ARM
PEDAL ARM
12
PEDAL ARM TUBE
HARDWARE FOR STEP 3:
SPLIT
TEFLON
WASHER (E)
30 mm
Qty: 4
BOLT (G)
15 mm
Qty: 2
A Open HARDWARE FOR STEP 3.
B Align the bracket on the LEFT LOWER LINK ARM
with the tube on the LEFT PEDAL ARM.
C Slide the SPACER (D) through the LINK ARM
BRACKET and the PEDAL ARM so it can't rotate.
D Insert 2 TEFLON WASHERS (E) between the
PEDAL ARM and the LINK ARM BRACKET.
E Secure the joint with a FLAT WASHER (F) and
BOLT (G).
F Repeat on the other side.
SPACER (D)
70 mm axis
Qty: 2
FLAT
WASHER (F)
35 mm
Qty: 2