Changing Settings - Pioneer PDA-V100HD Manual De Instrucciones

Advanced functions

Changing settings

Changing HDMI output resolution
When converting analog input signals to HDMI, the
output resolution must be set.
This setting is supported when the currently selected
input is INPUT 2, INPUT 3 (SCART), or INPUT 5.
1
4
RESOLUTION
• Press the remote control unit's RESOLUTION
button.
The following items can be set:
Item Description
Auto
Resolution is set automatically in
(default) response to the input signal.
480p/576p
Switch to 480p/576p resolution
720p Switch to 720p resolution
1080i
Switch to 1080i resolution
Note
• Under normal conditions, leave this set to Auto.
INPUT
3
2
5
6
SETTING
COLOUR SIGNAL
SYSTEM SELECT
Selecting the colour system
Select the colour system for analog input signals.
This setting is supported when the currently selected
input is INPUT 3 (SCART), or INPUT 5.
1
4
RESOLUTION
• Press the remote control unit's COLOUR
SYSTEM button.
The system can be set to Auto (default), PAL, SECAM,
NTSC, 4.43NTSC or PAL60.
Note
• Under normal conditions, leave this set to Auto.
Selecting the INPUT3 source signal
Select the INPUT 3 source signal.
1
4
RESOLUTION
• Press the remote control unit's SIGNAL SELECT
button.
The signal can be selected from among VIDEO
(default), S-VIDEO, RGB, or HDMI.
INPUT
2 3
5 6
SETTING
COLOUR SIGNAL
SYSTEM SELECT
INPUT
2 3
5 6
SETTING
COLOUR SIGNAL
SYSTEM
SELECT
10
19
En