Setting The Video Signal Format - Pioneer PDA-V100HD Manual De Instrucciones

10 Advanced functions

Setting the video signal format

When converting analog input signals to HDMI, set the
colour format.
• Press the remote control unit's VIDEO button.
The following items can be set:
Item Description
Auto Automatically sets the signal format in
(default) response to the input signal.
Colour-1
Digital Component Video signals (4:2:2)
locked
Colour-2
Digital Component Video signals (4:4:4)
locked
Colour-3 Digital RGB signals (16 to 235) locked
Colour-4
Digital RGB signals (0 to 255) locked
Note
• Under normal conditions, leave this set to Auto.
20
En
INPUT
1 2 3
4 5 6
SETTING
COLOUR SIGNAL
SYSTEM SELECT
RESOLUTION
VIDEO
HDMI
AUDIO
Setting the audio signal when using HDMI
input
When using an HDMI input, set the audio signal
format.
This setting is supported when the currently selected
input is INPUT 1 (HDMI), INPUT 3 (HDMI), or INPUT 4
(HDMI).
1
4
RESOLUTION
• Press the remote control unit's AUDIO button.
The following items can be set:
Item Description
Auto
Audio signal format is set automatically
(default) in response to the type of input signal.
Digital
Plays only HDMI digital audio.
Analogue When both HDMI and analog connec-
tors are connected, analog signals only
are played.
Note
• Under normal conditions, leave this set to Auto.
• This setting cannot be made for INPUT 6, since
analog audio connectors are not provided.
INPUT
2 3
5 6
SETTING
COLOUR SIGNAL
SYSTEM SELECT
VIDEO
HDMI
AUDIO