Operation Instructions - SATA 03005 Manual Del Uso

- The specification does not include errors introduced by the capacitance of
the test probes and the capacitance of the measured circuit.
-These errors can be eliminated by subtracting the background value of
screen from the measurement readings.
Diode test
Range Introduction
LCD shows the
approximate value of
the forward voltage
drop of the diode
Continuity test
Range Introduction
When the resistance of the measured circuit is less than about
20Ω, the built-in beeper sounds. When the resistance is greater
than 150Ω, the beeper does not sound.
When the resistance is between 20 Ω and 150 Ω, the beeper may
sound or not.

Operation instructions

Data hold
-Press the "HOLD" button once, the current reading is held on the screen,
and the " " symbol appears. Pressing the button again cancels the data
hold function and the "
-Measuring DC voltage
1. Connect the black test probe to the "COM" jack and the red test probe to
the " " jack (or "
2. Set the function switch to the "
3. Connect the test probes to both ends of the circuit to be measured.
4. Take readings, and the polarity of the end connected to red test probe will
also be indicated.
03005 / 03007
Remarks
Open-circuit voltage: About 1.4V
Test current: About 0.7mA
" symbol disappears.
" jack).
" position.
-29-
EN DE RU KO PT JA ES