Preparation; Installing The Battery Pack; Removing The Battery Pack - Kenwood ProTalk DIGITAL TK-3601D Guia Del Usuario

INSTALLING THE BATTERY PACK

CAUTION
• Do not short the battery terminals or dispose of the battery by fi re.
• Never attempt to remove the casing from the battery pack.
Battery cover
Battery pack

REMOVING THE BATTERY PACK

a
8

PREPARATION

1 Insert the battery pack into the battery
Label
2 Align the battery cover with the groove
a
b
3 Slide the lock lever (both side) to lock it.
Lock Lever
b
cover.
• Pay attention to the position of notch of
the battery pack.
• Insert the battery pack with the model
name label facing up.
• Be careful not to drop the battery pack.
on the back of the transceiver.
• There will be feedback in the form of a
click.
1 Slide the lock lever (both side) to
unlock.
2 Release the lock on the battery cover,
then remove the battery cover with a
coin or the like.
• Be careful not to drop the battery pack.