Kenwood ProTalk DIGITAL TK-3601D Guia Del Usuario página 15

f PTT (Push to Talk) switch
Press and hold, then speak into the microphone to transmit.
g SP/MIC jack
Insert the speaker/ microphone or headset plug into this jack.
DISPLAY
Indicator
When receiving: Appears the signal strength.
When transmitting : Appears the Transmit Power.
Receiving :
Transmitting :
Appears the battery power.
Appears when channel type is set to digital.
Appears when the Scan is in progress.
Blinks when the Scan is paused.
Appears when the Compander is activated.
PRIVACY
Appears when the Scrambler (Analog) is activated.
Appears when the VOX function is in progress.
Appears when the Button Lock function is activated.
Appears when the Earphone mode is activated.
Appears when the Second Scan function is activated.
Blinks when the Second Scan paused and staying on Second Channel.
Appears when the Monitor Open or Squelch Off is activated.
PRIVACY
: Strong
: High Power
: High : Suffi cient
Description
: Suffi cient
: Low
: Weak
(Flashing) : Very Low
13