Example Of System With Rvs 46 Accessory; List Of Faults - Siemens RVS 46.530 Manual Del Usuario

CONFIGURING THE MAXIMUM FLOW TEMPERATURE
• Access menu 2.
• B Commissioning
• B Temps / mode CH1
• B programme row 741
• B a value less than 45°C
After each system configuration process, carry out the following procedure for saving the components to the boiler.
• Access menu 2 as indicated at the beginning of this section.
• B Configuration
• B Yes then B to confirm.

5. EXAMPLE OF SYSTEM WITH RVS 46 ACCESSORY

The diagrams in this document are purely indicative and must be backed by a technical thermal analysis.
1 DHW STORAGE BOILER FILLING PUMP
2 FLOW PROBE (QAD36)
3 RETURN PROBE (QAD36)
4 EXTERNAL SENSOR
5 MASTER BOILER
6 MIXING VALVE

6. LIST OF FAULTS

Fault
10 External probe sensor
30 Flow sensor
81 LPB circuit damage
82 LPB, address conflict
7105700.03 - 1-10/11
B to confirm.
B to confirm.
B to confirm.
B to confirm.
B B programme row 6200 then
7 MIXED ZONE PUMP
8 FLOW PROBE
9 REMOTE CONTROL
10 ZONE VALVE
11 RADIATORS
12 ROOM THERMOSTAT
Description of fault
Heating circuit enabled with no command (thermostat, room unit or external unit) or external probe faulty
Mixed circuit sensor not detected
Probable short circuit on wiring.
Same address assigned to 2 or more boilers
B.
13 RELAY
14 DHW STORAGE BOILER PROBE
15 DHW STORAGE BOILER
16 HEATING FLOW PUMP
n BOILERS IN NON-MASTER CASCADE
12