Interlogix UVC-XP4DN-HR Guía De Inicio Rápida página 7

Ocultar thumbs Ver también para UVC-XP4DN-HR:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 16
Programming
OSD controls
Use the OSD (on-screen display) setup menus to program the camera.
See Figure 5.
Note:
If you do not press a button for two minutes, your changes are
saved, and the camera returns to its normal function.
Figure 5: OSD menu controls
Up
Left
Note: Wherever the PREVIOUS PAGE option appears, use it to leave
the current menu and return to the previous menu. Move to the
PREVIOUS PAGE option and press the center button.
Main menu
The camera is configured through the setup menus which appear on-
screen.
To access and navigate the main menu, press and hold the center
button of the OSD (See Figure 5). Use the up or down buttons to move
between items, and press the center button to select that item. Use the
left and right buttons to select the different options available for the
item.
You can return to the previous menu from any of the menus (except
the Main menu) by selecting the Previous page option.
There is a menu map on the back page of the manual that shows an
overview of the menus.
Refer to the User Manual for detailed programming instructions.
Quick Start Guide
Down
Right
Enter
 
7 EN

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Uvc-xp4dn-p

Tabla de contenido