Sauder 411201 Instrucciones De Ensamblaje página 6

Step 1
Assemble your unit on a carpeted fl oor or on the empty
å
carton to avoid scratching your unit or the fl oor.
Push twenty-two HIDDEN CAMS (1F) into the
å
ENDS (A and B), UPRIGHT (C), BOTTOMS (E), and
DRAWER BRACES (M65). Then, insert ten CAM
DOWELS (2F) into the HIDDEN CAMS in the short
edges of the ENDS (A and B), UPRIGHT (C),
and BOTTOMS (E).
2F
(10 used)
(22 used)
Do not insert
CAM DOWELS
into these edges.
Arrow
1F
The arrow in the HIDDEN
CAM must point toward the
hole in the edge of the board.
Page 6
Arrow
1F
B
A
Look for this icon. It means a
video assembly tip is available at
www.sauder.com/services/tips
Scan this QR code or go to this address:
http://qr.sauder.com/?ID=1627
to watch a video on how to assemble your unit.
Do not tighten the HIDDEN CAMS in this step.
Do not insert
CAM DOWELS
into these parts.
M65
M65
E
C
Insert the metal end of the CAM
DOWEL into the HIDDEN CAM.
411201
M65
M65
M65
M65
E
Arrow
www.sauder.com/services