Kit Includes; Tools Needed; Key Definitions - Petsafe HPA11-10876 Guia De Instalacion

Kit Includes

Tools Needed

Hammer
Jigsaw
Slotted & Phillips
Screwdrivers
NOTE: The Cat Door can be installed in most doors and walls. Additional skills, tools and materials
(such as wood framing and hardware) may be required. It is not possible to cut holes in tempered
or double pane glass except at the time of manufacture. Consult a professional glazier or glass
manufacturer to install the pet door in a glass door or window.

Key Definitions

• Outer Frame Size: Overall pet door dimensions
• Cut-Out Size: Dimensions of opening cut in homeowner's door for proper fit and pet door installation
• Flap Opening Size: Usable flap size for pet to enter and exit through pet door
• Interior Frame: Pet door frame on the inside of home; frame with flap and 4-way lock
• Exterior Frame: Pet door frame on the outside of home
• 4-Way Lock: Red knob on interior frame used to control the pet's access to the pet door
4
³⁄ " (5 mm)
½" (13 mm)
Drill Bits
Drill
Pencil
Hacksaw
Customer Care Center 1-800-732-2677
3" (75 mm)
Screws (2pcs.)
2" (50 mm)
Screws (2pcs.)
1¹⁄ " (28 mm)
Screws (2pcs.)
(4pcs.)
Level
Sand Paper
Masking or
Painter's Tape
Tape Measure
Scissors
Safety
Equipment
Optional
•Duct Tape
•Caulk