Sauder 421982 Manual Del Usario página 23

Step 19
First, slide a HINGE BRACKET (48H) into the L shaped
å
clip underneath the HINGE (54H). Second, swing the
other end of it up until it snaps into the HINGE as shown
in the right diagram. Repeat this for the remaining HINGE
BRACKET and HINGE.
Fasten the HINGES (54H) to the LARGE DOOR (D). Use
å
four SILVER 5/8" FLAT HEAD SCREWS (23S).
54H
www.sauder.com/services
23S
SILVER 5/8" FLAT HEAD SCREW
(4 used in this step)
2 ND
D
421982
54H
1 ST
48H
Square hole
Page 23