Publicidad
Step 1
Assemble your unit on a carpeted fl oor or on the empty
å
carton to avoid scratching your unit or the fl oor.
To begin assembly, push a SAUDER TWIST-LOCK®
å
FASTENER (7F) into the large holes in the ENDS (A
and B). Repeat this step for the SMALL UPRIGHT (C),
BOTTOM (L), LARGE UPRIGHT (M), and SHELF (N).
(16 used)
www.sauder.com/services
Do not tighten the TWIST-LOCK® FASTENERS in this step.
7F
A
Look for this icon. It means a
video assembly tip is available at
www.sauder.com/services/tips
B
421982
Some assembly
(and snacks) required.
Page 5
Publicidad
