Fault Indication - inti CEDRO+ Serie Manual De Usuario

PV array charge ampere hours and load ampere hours are off after power failure.
The interface automatically cycles in the displayed sequence:
Press OK to browse the interface:

Fault indication

Status
Short circuit
Over current
Low voltage
Over voltage
Over temperature
Communication failure
Controller does not correctly identity the
system voltage
34
MANUAL DE USUARIO CONTROLADOR CEDRO PLUS
Icon Description
Load off, fault icon display, load icon flashes, the LCD screen displays E1.
Load off, fault icon display, load icon flashes, the LCD screen displays E2.
Battery level shows empty, fault icon display, battery frame flashes, the LCD
screen displays E3.
Battery level shows full, fault icon display, battery flashes, the LCD screen
displays E4.
The charge and discharge are off, fault icon display, icon flashing, the LCD
screen displays E5.
Display board failed to obtain controller data, fault icon display, the LCD screen
displays E6.
The controller does not correctly identify system voltage, fault icon display, the
LCD screen displays E7.
www.intipv.com