Keyboard Function; Parameters Setting - inti CEDRO+ Serie Manual De Usuario

Fault indication
Status
Short circuit
Over current
Low voltage
Over voltage
Over temperature
Controller does not correctly identity the
system voltage

KEYBOARD FUNCTION

Mode
Browse interface
Static display
Press the MENU and OK key
again for 1s, the LCD interface
will unlock and start scrolling.

PARAMETERS SETTING

ICC-4024150
When the icon appears in the display interface, it means that the parameters can be set. Press the MENU key for 1s, then icon
press OK to change the parameter.
Low voltage protection
When the LCD shows as displayed below, press the MENU key for 1s, the icon
www.intipv.com
Icon
Operation
Press OK
Press the MENU and OK key at the same time for 1s, the LCD screen will lock the interface.
Presione la tecla MENU durante 1s para entrar en el modo de configuración cuando el ícono
aparezca en el display, y salga automáticamente después de 30s.
Description
Load off, fault icon display, the LCD screen displays E1.
Load off, fault icon display, the LCD screen displays E2.
Load off, battery level shows empty, fault icon display,
battery frame flashes, the LCD screen displays E3.
The charge and discharge are off, battery level shows
full, fault icon display, battery flashes, the LCD screen
displays E4.
The charge and discharge are off, fault icon display, icon
flashing, the LCD screen displays E5.
Controller does not correctly identify system voltage.
flashes, you can set the controller low voltage protection:
MANUAL DE USUARIO CONTROLADOR CEDRO PLUS
flashes,
37