Safety Rules - Hinkley 930008 Manual De Instrucciones

Kit de luz led para ventilador de techo
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

SAFETY RULES

"CAUTION-RISK OF FIRE"
CONSULT A QUALIFIED ELECTRICIAN TO ENSURE CORRECT BRANCH CIRCUIT CONDUCTOR.
WARNING! RISK OF ELECTRIC SHOCK
All electrical connections must be made in accordance with local codes, ordinances, or national codes. If you are unfamiliar with installing
electrical wiring, secure the services of a qualified electrician. Before starting this installation, disconnect the power by turning off the circuit
breaker at your main panel or removing the fuse at the fuse block. Turning the power off using the ceiling fan switch (speed control on/off)
is not sufficient to prevent electrical shock.
NOTE: The important safeguards and instructions appearing in this manual are not meant to cover all possible conditions and situations
that may occur. It must be understood that common sense, caution and care are factors which cannot be built into any product. These
factors must be supplied by the person (s) caring for and operating the unit.
UNPACKING YOUR LIGHT KIT
UNPACK YOUR LIGHT KIT AND CHECK THE CONTENTS.
• Do not discard the carton. If warranty replacement or repair is ever necessary, the fan should be returned in original packing. Remove all
parts and hardware.
• Examine all parts. You should have the following:
02
| hinkley.com
1
2
3
4
5
PACKAGE CONTENTS
1
Light kit
2
9W LED bulb
3
Glass shade
Nut, Wire Nuts (2), Spring Washer
4
Pull chain and fob
5
Extra thumbscrew

Publicidad

Tabla de contenido
loading

Tabla de contenido