Care And Maintenance; Spray Arms - Haier DW12-EFET Instrucciones De Uso

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 107

Care and maintenance

Regular inspection and maintenance of your appliance helps to prevent problems from occurring.This
saves time and aggravation.You should therefore carefully inspect the inside of your dishwasher from
time to time.
Overall condition of appliance
Check that no grease or scale has accumulated on the inside of the dishwasher.
If you discover any deposits:
- Clean the interior of the dishwasher thorughly with a detergent solution.
Filters
The filters
"7" , "8"
prevent larger particles of food in the water
from reaching the pump.These particles may occasionally
block the filters.
When the appliance has finished washing, check the fil-
ters for particles of food and, if required, clean.
After undoing the coarse micro-filter "7", the filter unit
can be removed. Remove any particles of food and rinse
the filters under running water.
Insert the filter unit
"8"
and tighten the coarse micro-filter.

Spray arms

Lime and remnants of food in the washing water can block the
nozzles in the spray arms
"9"
Inspect the nozzles in the spray arms for blocked holes
due to remnants of food.
If necessary, pull the lower arm
Unscrew the upper spray arm "9".
Clean both spray arms under running water.
Refit the spray arms. Ensure that the lower arm has locked
into place and the upper one is screwed tight.
and
"10"
and the arm mountings.
"10"
upwards and lift it off.
"8"
9
en
7
8
10
19

Publicidad

Tabla de contenido
loading

Tabla de contenido