Changing The Date And Time; Setting Of Time Bands - Daikin UATYA-BBAY1 Manual De Operación

2.5 Changing the date and time

Scroll the main menu until you find the "Configurations" group and select it.
Select "Date and Time" in the "Configurations" menu and access the screen where it is possible to edit the date and
time setpoints.
Select the write icon in the bottom right-hand side to access the edit screen.
When a green value is tapped, a virtual keypad appears: use the keypad to set the new values. After entering the
new value, tick it to confirm it.
After changing the values, tap the Save icon on the bottom right-hand side to save the new setpoints.
The arrow on the left is used to go back to the previous screen without saving the changed parameters.

2.6 Setting of time bands

Access to the screen where the time bands are set up requires entry of a password.
Scroll the main menu until you find the "Parameters" group and select it.
Scroll the "Parameters" menu until you find the "ES Energy saving" group.
After selecting "ES Energy saving", access is gained to the group of parameters used to set up the time bands.
Refer to the relevant chapter for more information on the parameter setup logic.
Translation from original instructions We reserve the right to make changes without any prior notice.
Packaged Rooftop UATYA
8
4P645203-1