Graphics On The Display; Graphic Conventions; Icons And Symbols - Daikin UATYA-BBAY1 Manual De Operación

3

GRAPHICS ON THE DISPLAY

During development of the application, particular attention was given to intuitive use of the user interface.

3.1 Graphic conventions

The touch-screen display is designed to browse the interface.
Provision has been made for some intuitive icon buttons that are tapped to easily browse the featured screens and
menus.
Other user-friendly symbols are used to locate parts and active functions.
Below is a list of the icons used as buttons and the symbols featured in the various screens of the interface.
3.1.1

Icons and symbols

Icons are used as physical buttons in the touch-screen display to browse the menus and screens. The featured icons
include:
"Home" - this icon is pressed to go back to the Home page. The arrow buttons are pressed to move within
the given loop;
"Info" - this icon gives access to the screens containing information on both the software and the unit; The
arrow buttons are pressed to move within the given loop;
"On/Off" - this icon gives access to the screen used to switch the unit on or off from the user interface;
"Cooling/Heating" This icon gives access to the screen where the unit operating mode is switched from
cooling to heating using the user interface.
"Menu" - pressing of this icon on the Home page gives access to the "Menu" screen. If this icon is pressed on
any other screen, the system moves back by one level;
"Demand" - this icon gives access to the screens where the various demands from the system are displayed;
The arrow buttons are pressed to move within the given loop;
"Dampers" This icon gives access to the screens where the operating status of the dampers is displayed. The
arrow buttons are pressed to move within the given loop;
"Synoptic panel" - this icon gives access to the screen where the layout showing the operating principle of
the circuit featured in the unit is displayed. A tap on the circuit components gives access to the relevant information
and parameters.
A click on this icon gives access to the Alarms menu. If the icon is red, at least one alarm is active; no alarm
is active if it is grey.
A click on this icon either enables or disables the function it is associated with.
A click on this icon enables movement to the left within one screen loop.
A click on this icon enables movement to the right within one screen loop.
We reserve the right to make changes without any prior notice.
UATYA
4P645203-1
Translation from original instructions
Packaged Rooftop
9