Electrical Installation - Skymsen MAXICONV VP Manual De Instrucciones

If the oven is installed in a wall bracket, make sure that the bracket is appropriate for the
weight of the oven. If you want to install it in the furniture, respect the distance according
to the picture below.
300mm
300mm
300mm
300mm
Important observations
1 - A distance of 300mm far from the laterals and to the oven to ventilation must be
respected;
2 - A minimum of 700mm of physical space for the maintenance must be provided, if
possible;
3 - The Oven must not be positioned next to heat spots (close to stoves, frying pens, grills,
etc) or other appliances that expel fat or heat. The control panel ventilation is necessary
and the motor must be far from heat sources, to avoid damages to the appliance electric
system.

2.1.2 Electrical installation

This appliance was developed to be used in 220 Volts(60HZ). When you receive the
machine, check the registered tension in the tag of the electric cable.
The power cord has 3 wires, one is the ground wire. It is mandatory that the three spots
are on before starting the appliance.
This appliance is provided with a connection cable that has a monophasic plug connected
to it 2P+T 32A 220V.
For the electrical connection of this appliance, an industrial monophasic outlet model2P+T
32A 220V must be used from the same manufacturer of the plug, and must be installed
according to the current regulations.
8