Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
5. Let liftgate hang with support from corner
posts of the pickup bed.
CAUTION
Before drilling holes in the pickup
bed, ensure there are no obstruc-
tions to drill bit or items that could
be damaged.
6. Hold RH mounting bracket against cor-
ner post of the pickup bed (FIG. 13-1).
Then, use 2 bracket holes to drill 2 holes
bed (FIG. 13-1). Repeat for LH mounting
bracket.
NOTE: For bolting steel brackets to
aluminum truck body, only use
the zinc-plated fasteners and
aluminum spacers supplied
with the bracket and bolt kits.
7.
pickup bed as shown in FIG. 13-1. Re-
peat for LH mounting bracket.
LIFT CORPORATION Sht. 13 of 56 DSG#
INSTALLING LIFTGATE - Continued
M-16-32
3/8"-16 HEX BOLT
(2 PLACES)
DRILL 2 HOLES
IN FLOOR
ALUMINUM
SPACERS
3/8"
LOCK WASHER
(2 PLACES)
BOLTING RH MOUNTING BRACKET
TO PICKUP BED (LIFTGATE NOT SHOWN)
FIG. 13-1
Rev. C Date: 08/13/19
RH MOUNTING
BRACKET
CORNER
POST
FLOOR OF
PICKUP BED
3/8" HEX NUT
(2 PLACES)
Publicidad
Tabla de contenido
