Transport & Storage; Handling And Storage; Transport & Lifting - Husqvarna HTC D60 Manual De Usuario

HTC D60
4. Transport & storage

4.1 Handling and storage

The dust extractor should be stored in a heated, dry area when not in use.
Otherwise it may be damaged by condensation and cold.
The dust extractor's dimensions and weight are given in chapter Technical data.
4.2 Transport & lifting
Always ensure that the dust extractor is emptied of dust and other particles before it is transported,
lifted or hoisted. When being moved with a forklift, always place the forks under the protection bar.
Always make sure that the dust extractor is securely anchored to its surroundings and that the park-
ing brake is in the locked position during transport to prevent it from moving during transport. Ensure
that the securing straps, or other equipment used for anchoring during transport, are tightened in
lashing points and tensioned downwards as illustrated.
When lifting the machine, use 4 approved lifting straps at the lifting points on the machine.
When the dust extractor is to be hoisted, it must be securely anchored at two lashing points.
Pos. Description
1 Lifting points
2 Lashing points
3 Parking brake
11
Warning!
If handled carelessly, the dust extractor can overturn and cause both
personal injury and damage to the equipment.
V 1.0