Control Panel - Husqvarna HTC D60 Manual De Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

HTC D60

5.4 Control panel

NO.
Icon
1
2
3
4
5
6
7
8
9
13
Function
Display
On/Standby
Remote connection Indicates status for DURATIQ remote connection.
Accessory off/on
Dust emptying
(accessory, automat-
ic)
Filter cleaning
(accessory, automat-
ic)
Alarm / Warning
Menu navigation
Start / stop
Indicates flow (m³ or cfm).
Indicates pressure (total pressure mbar or in Aq).
Filter status, 0% clean filter, 100% blocked filter.
Starts up or places the machine in standby mode.
The machine wakes up when power is supplied. To place
the machine into standby mode, hold the button in. To
wake the machine press once.
Switches the accessory off and on
Keeps the filter cleaning valve open for a time so that the
dust can fall down in the dust bags.
Runs filter cleaning (closes inlet valve and opens filter
cleaning valve) once.
Alarm, red LED. The machine cannot be operated due to
an error
Warning, yellow LED. The machine has restricted function-
ality.
Controls menu selection etc.
When you are not in the menus these buttons control other
functions.
Arrow up/down - switches between which value on the
screen is to be dominating (large).
Starts and stops the side duct fan.
Automatic phase switching (direction of rotation) of the
side duct fan, In the event of incorrect direction of rotation,
the side duct fan stops, the phases switch and the side
duct fan starts in the correct direction.
Description
V 1.0

Publicidad

Tabla de contenido
loading

Tabla de contenido