Replacing The Dust Bag - Husqvarna HTC D60 Manual De Usuario

5.8 Replacing the dust bag

The dust extractor is equipped with a bag system that makes it possible to minimise dust exposure when
changing dust bags. This bag system can be ordered. Please contact your HTC retailer.
Place the bags in the holder and install on the container. Pull up the inner part of the bag and tighten
with the strap. Seal the lower part with a tie.
When the bag is full, pull out the bag and install two
ties and cut off the bag.
V 1.0
Warning!
Use protective equipment such as safety shoes, safety
goggles, protective gloves, mouth mask and hearing pro-
tection.
Tip!
Pull out a new length of empty bag down to the collection plate. This
is to create the best conditions for the waste to fall into the bag.
HTC D60
18