Introduction; General Information; Liability; Manual - Husqvarna HTC D60 Manual De Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

HTC D60

2. Introduction

2.1 General information

Together with HTC's floor grinders, HTC's dust extractor is designed to create as dust-free environ-
ment as possible in conjunction with the dry grinding of stone and concrete floors. The dust sucked
up is collected in, for example, a bag system.
Read the manual carefully so that you know how to use and maintain the dust extractor before using
it. Contact your local retailer for further information. For contact information, see Contact Information
at the start of the manual.

2.2 Liability

Even though every effort has been made to make this manual as complete and accurate as possi-
ble, we bear no responsibility for incorrect or missing information. HTC reserves the right to change
descriptions in this manual without giving prior notice.
This manual is protected by the Copyright Act and no part of it may be copied or used in any other
way without the written approval of HTC.

2.3 Manual

In addition to general functions, this manual contains information on areas of use and care of the dust
extractor.
Safety Instructions – Explanation of Symbols
The following symbols are used in the document to indicate where special attention is needed.
7
Warning!
This symbol means Warning! and indicates a risk of personal injury or material
damage in the event of incorrect use of the dust extractor. If you see this symbol
next to a section of text, you must be particularly careful when reading through
the text and not carry out any stages of which you are unsure. This is for your own
and other users' safety and to avoid damage to the dust extractor.
Note!
This symbol means Note! and indicates a potential risk of material damage in
the event of incorrect use of the dust extractor. If you see this symbol next to a
section of text, you must be particularly careful when reading through the text and
must not carry out any stages of which you are unsure. This is to avoid damage to
the dust extractor.
Tip!
This symbol means Tip! You can get tips and advice on ways to make operating
your dust extractor easier, and ways to avoid wear. When you see this symbol you
should read the accompanying text to facilitate your work and prolong the service
life of the dust extractor.
V 1.0

Publicidad

Tabla de contenido
loading

Tabla de contenido