Cautions; Security; Risk Of Electric Shock - Furius FIX 161 MINI Manual De Instrucciones

CAUTIONS

2.
The en�re instruc�on manual must be read. Ignoring these instruc�ons may create a risk of electric shock,
fire and/or severe injury. It is also recommended to read the accident preven�on regula�ons of the
metalworking industry workers associa�on (BGV D1, BGI 855, etc.).
Electric arc welding is a dangerous ac�vity, both for those who apply it and for third par�es. You should
always wear adequate protec�on when welding and handling a welding machine. For more informa�on,
see the operator's safety guidelines in accordance with the manufacturer's accident preven�on
requirements.
3.

SECURITY

Risk of electric shock or electrocution.
Body contact with electrically ac�ve parts of the machine or its accessories (electrodes, electrode holders,
torches, work clamps) can cause an electrical shock that can be fatal or cause serious injury.
• Do not use the machine in the rain or snow.
• Do not touch
• Always wear insulated welding gloves, making sure they are dry and in good condi�on, without breaks or
perfora�ons.
• Electrically isolate the work area so that people are protected. Do not remove the case of the machine or
manipulate it internally when it is connected to the power supply.
• Only connect the machine to a 110 Volt 50 / 60Hz AC power source.
• Make sure the power board has the 60 Amp thermomagne�c switch and the ground connec�on properly connected.
Please read this manual carefully before using the welding power source
the electrodes or
WARNING
welding accessories with your bare hands.
5