Assembly And Initial Use; General Operation - Furius FIX 161 MINI Manual De Instrucciones

Assembly and initial use

7.
Note: It is necessary to use an electrode holder that complies with the NMX-J-038/11-ANCE
standard. Use a helmet in accordance with regula�ons and that has protec�ve glasses in
accordance with regula�ons, the level of protec�on (shade) must be at least 9-10. There should
be a slag hammer and wire brush. Before assembling make sure that the power switch is turned
off and that the power socket of the equipment is disconnected.
Connect the work cable to the ground socket with the nega�ve (-) symbol (MMA)
Connect the torch to the ground socket with the nega�ve symbol (-) (TIG)
Insert the coupling into the socket, and then turn it clockwise un�l it clicks. Pull on the coupling
device to ensure it is properly coupled. These coupling devices must be clean and free of oil.
Connect the electrode cable to the socket with the posi�ve symbol (+). (MMA)
Connect work cable to socket with posi�ve (+) symbol. (TIG)
Insert the coupling into the socket marked posi�ve (+), and then turn it clockwise. Pull on the
coupling device to verify that it is properly coupled. These coupling devices must be clean and
free of oil.
Power switch
This switch allows you to turn the equipment on and off with an audible click.
Transport Strap
Use it to transport the equipment easily and safely. The installa�on of the transport strap is
carried out in the slits in the upper part of the plas�c housings of the equipment.

General Operation

8.
Environment condi�ons
a) Operating ambient temperature:
Transport and storage temperature:
b) Relative humidity: Up to 50% at 40
c) Operating environment with normal levels of dust, acid, corrosive gases
that are not different from those produced by the welding process and that allow
adequate ventilation.
d) Equipment must be positioned less than 10 ° from the horizontal.
10
20
and up to 90% at 20
If the machine is placed more than 10 ° from the horizontal, it
can rotate on its axis causing damage.
40
55
14