Philips WP3870 Manual Del Usuario página 39

1
2
4222.002.6965.3.indd 39
7 Take the water purifier out of its packaging and put it on a flat
surface. Then pull the lock lever to unlock the water reservoir
cover (1) and remove it from the water reservoir (2). Now you can
remove the water reservoir from the wall holder.
8 Clean the outside of the water reservoir and its cover (see chapter
'Cleaning and maintenance').
9 Swing the transport lock to the left and push it into the wall holder.
10 Turn the elbow connector located on the rear of the wall holder to
the left or right, depending on the location of the water outlet you
want to connect it to and push the hose in its slot.
11 Attach the wall holder with the screws to the wall. Make sure the
hose remains properly positioned.
- The fixing plugs and screws are supplied with the water purifier.
12 Unscrew the swivel nut from the water supply connector and slide it
on the hose.
English
39
26-02-09 08:23