Preparing For Use - Philips WP3870 Manual Del Usuario

English
40
2
1
4222.002.6965.3.indd 40
13 Push the end of the hose onto the water supply connector and
tighten the swivel nut.

Preparing for use

Now that the wall holder is attached to the wall, proceed as follows to
prepare the water purifier for first use.
1 Unscrew the cap from the filter holder. Take the filter out of its
packaging and attach it to the cap of the filter holder. Place the filter
with cap into the filter holder and screw the cap onto the filter
holder.
2 Pull the filter holder release lever forward (1) and lift it up (2).
3 Place the filter holder with filter into the wall holder.
4 Push down the filter holder release lever to lock the filter holder
into place ('click').
26-02-09 08:23