How To Remove The Doors And Hinges - Maytag MBL1957VES Guia Del Usuario

I ,
NSTALLATION
CONT
Installing side-mounted
handles
If installing handles for the first time, the
fresh food and freezer handles can be
located on the back of the refrigerator.
Using a T-15 Torx ®
remove screws from the side of the
fresh food door or top of the freezer
door or drawer.
Align handle screw holes with door
holes and install handles with screws
that came in these screw holes.
Removing side-mounted
handles
Removing handles may be necessary
when transporting the
through tight spaces, or when reversing
the door.
Using a T-15 Torx ®
remove handle by removing three
screws from side of fresh food door or
top of freezer door or drawer.
Retain screws for later replacement.
*Torx *Torx ® ® is a registered trademark of Textron, Inc. is a registered trademark of Textron, Inc.
3
.
How to remove the
doors and hinges
Some installations require complete door
removal to get refrigerator to its final loca-
tion.
* screw driver,
WARNING – To avoid electrical shock
which can cause severe personal injury
or death, disconnect power to refrigera-
tor before removing doors. Connect
power only after replacing doors.
CAUTION – To avoid damage to walls
and flooring, protect soft vinyl or other
flooring with cardboard, rugs or other
protective material.
Unplug power cord from power
source.
Remove top hinge cover from refriger-
ator door by removing Phillips screw.
• Retain screw and cover for replace-
ment.
refrigerator
* screw driver,
WARNING
CAUTION
Unscrew 5/16" hex head screws from
top hinge to remove hinge.
• Retain all screws for later use.
Lift refrigerator door from center hinge
pin.
Hold freezer door in place while
removing center hinge pin with a 5/16"
hex nut driver. Remove freezer door.
• Retain hinge pin for later use.