Assembly; Making The Electrical Connection - Home Decorators Collection 51591 Guía De Uso Y Mantenimiento

Ocultar thumbs Ver también para 51591:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Assembly - Hanging the Fan (continued)
3

Making the electrical connection

WARNING: Each wire not supplied with this fan is designed to
accept up to one 12-gauge house wire and two wires from the
fan. If you have larger than 12-gauge house wiring or more
than one house wire to connect to the fan wiring, consult an
electrician for the proper size wire nuts to use.
IMPORTANT: Use the plastic wire connectors (BB) supplied with
your fan. Secure the connectors with electrical tape and ensure
there are no loose strands or connections.
NOTE: The fan comes with 78 in. lead wires for use with an
extended ball/ downrod assembly. If using the 6 in. ball/downrod
assembly (B) provided, you can cut the lead wires to your desired
length (no shorter than 12 in.)
The fan comes with 78 in. lead wires for use with an extended
ball/ downrod assembly. If using the 6 in. ball/downrod
assembly (B) provided, you can cut the lead wires to your
desired length (no shorter than 12 in.). This will make extra
room in the canopy (C), if you do not wish to cut the wires,
you will need to neatly wrap them.
Connect the fan motor green wires to the household green or
bare wire using a wire connecting nut (BB).
Connect the fan motor white wires to the household white
wire using a wire connecting nut (BB).
Connect the fan motor black wires to the household black
wire using a wire connecting nut (BB).
Secure each wire connecting nut using electrical tape.
Turn the wire connecting nut (BB) upward and push the wiring
into the outlet box (KK).
Black
Black
9
Please contact 1-800-986-3460 for further assistance.
Outlet box
in the ceiling (KK)
White
Green or bare wire
White
Green
BB (x3)
HOMEDEPOT.COM/HOMEDECORATORS

Publicidad

Capítulos

Tabla de contenido
loading

Este manual también es adecuado para:

1001 029 138

Tabla de contenido