Electrical Connections - Cree DDS Serie Instrucciones De Instalación

7
Flip Clips
Flip Clips

ELECTRICAL CONNECTIONS

In accordance with California Proposition 65, Cree provides the following statement due to the customary
electronics components used in this product. WARNING: This product contains a chemical known to
the state of California to cause cancer. WARNING: This product contains a chemical known to the
state of California to cause birth defects or other reproductive harm.
© 2017 Cree, Inc. All rights reserved. For informational purposes only. Content is subject to change.
See http://lighting.cree.com/warranty for warranty and specifications. Cree
trademark of Cree, Inc.
3 of 3
LINE
OR HOT 1
TO CAN GROUND-GREEN
NEUTRAL
NEUTRAL-WHITE
is a registered trademark, and the Cree logo is a
®
STEP 7:
Install the disk light into the ceiling by rotating the flip clips
clockwise until the clips are oriented directly away from the
fixture. Push the disk light up into the recessed can and rotate
1/4 turn clockwise until the trim ring on the disk light is flush
with the ceiling. See Figure 7.
NOTE: To remove disk light from recessed can, grip the trim
ring of the disk light and rotate counterclockwise while pulling
disk light downwards until it becomes free from the recessed
can.
LUMINAIRE
LINE-BLACK
lighting.cree.com
LPN000239_B