EOMAT ECO
2.6. Residual energy
Bear in mind that after the machine has been switched off or when it is idle, various resid-
ual energies can be present, as, for example,
• in hydraulic pressure lines and pressurised containers
• in live power lines and capacitors.
2.7. Constructional changes to the machine
• No modifications, additions or alterations to the machine may be undertaken without
express authorisation by the manufacturer.
• Change immediately any machine parts not in proper condition or get in touch with the
manufacturer.
• Use only genuine spare parts.
2.8. Machine cleaning and disposal
Cleaning: - withdraw plug before cleaning
- use only alkaline cleaning materials
Disposal: - when disassembling to enable disposal, observe the qualifications stipulated
(see table in chapter 16).
2.9. Accident prevention regulations, health and safety directives
The operating company should without fail comply with accident prevention regulations
and health and safety directives.
In case of accident, switch machine off immediately.
Page
13
EOMATECO/MANUAL