Hydraulic Components; Hydraulic Circuit Diagram; Checking The Fluid Level; Changing The Hydraulic Oil - Parker EOMAT ECO Manual De Funcionamiento

EOMAT ECO

14.2 Hydraulic components

Refer to PARKER - Hydraulic 108 HDS 19-BS6-4H-33-00-Y
14.2.1 Hydraulic diagram
See appendix

14.2.2 Checking the fluid level

Check oil level regularly and replenish as required.

14.2.3 Changing the hydraulic oil

Hydraulic oil H-LP 22
Allowing this to be carried out by Parker service is recommended.
14.3

Electrical components

14.3.1 Electrical diagram
See appendix
Unscrew filler plug.
The oil level should be visible about
10mm in front of the filler plug.
The position of the bleeding plug
should be kept without fail.
It should be positioned about 35°
from the hydraulic axis, turned to the
right.
Direction of view for
the bleeding plug.
Page 29 EOMATECO/MANUAL