Functional Checks After Initial Start-Up; Dismantling And Preparation For Transportation - Parker EOMAT ECO Manual De Funcionamiento

EOMAT ECO

11. Functional checks after initial start-up

Press the "I" (hydraulics on) button; the piston should travel forward.
If any functional errors occur the machine should be switched off via the "O" button and
the power plug withdrawn.

12. Dismantling and preparation for transportation.

Before transportation the telescopic handle should be released by disconnecting
the spring cotter.
There should be no loose tools or other items on the machine which could fall off
during transportation.
The cable should be coiled up and attached to the machine in such a way that it
cannot become entangled during transportation.
Page 21 EOMATECO/MANUAL