EGAmaster AQUAMaster 79906 Manual De Instrucciones página 29

Taladro con percusión
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

SAFETY INSTRUCTIONS FOR PREVENTION OF WORKPLACE HAZARDS
WARNING
The following applies unless otherwise stated in the machine's operating instructions booklet:
The machine is not insulated to protect against an electrical power surge.
CAUTION – risk of injury!
Hands may be crushed, seized or otherwise injured.
Keep your hands away from areas which are marked with this symbol.
CAUTION – risk of injury!
Remove all sources of danger which could lead to slipping, tripping or falling (e.g. slippery surface,
hoses, cables).
Keep the work area clean and dry.
PROHIBITION – Eating, drinking and smoking are forbidden during operation.
WARNING – Explosion hazard!
Operate the machine according to the intended use only.
The machine is designed for the use in areas exposed to explosion hazards as well.
Observe the following:
· Valid local explosion protection directives.
· Technical specification of the machine.
· Markings on the machine.
· Avoid the generation of sparks.
· When operating the machine, do not push or beat against other material and hold the machine
firmly and safely by hand.
· Do not slide the machine over the ground.
· If heat generation exceeds the specified surface temperature, the machine has to be stopped
instantly. It only may be re-started after having eliminated the cause for the fault.
· The work area and the next working areas should always be protected from sparks.
· Flammable and explosible material has to be removed from the work area before work is started.
Among others, this relates to dust deposits, cardboard, packing material, textile, wood and wooden
splints, but also flammable fluids and gas.
Ensure adequate lighting.
Be extra careful in unfamiliar surroundings. There is a risk of hidden hazards such as electric lines or
other supply lines. Make sure when operating the machine that no electrical cables, gas pipes or similar
could be damaged. Use suitable and personal protective equipment.
SAFETY INSTRUCTIONS FOR PREVENTION OF HAZARDS CAUSED BY COMPRESSED AIR
WARNING – Compressed air can cause severe injury. Before working on the tools (e.g. installation,
changing accessories or machine tools, prior to a long standstill, maintenance, etc.) depressurize
pneumatic equipment (close valve and depressurize pneumatic hose).
CAUTION – Risk of injury by whipping pneumatic hose.
Check pneumatic hoses, connection components and fittings regularly for any damages and proper
fixture.
29

Publicidad

Tabla de contenido
loading

Tabla de contenido