Renfert lay:art 1046 0000 Instrucciones Para El Servicio página 6

2. Functional description of the case
When the lid is opened in a 90°
angle it can be easily removed from
the case base.
Gently press the onto the base (1)
and pull the lid (2) upwards.
EN
At an angle of 115° there is a lid locking
position, which will hold the lid open in a stable
position.
Caution:
If this position is overstretched, the
hinges could become damaged.
3. Labelling foil
The non-permanent marker pen provid-
ed can be used to write on the labelling
foil (4). The foil can be removed from the
lid in order to exchange or inscribe the
label.
Use the matt side of the foil to write on.
When replacing the foil, clip behind the
4 mounting points which can be found
on the lid. Firstly, bend the retaining flaps
towards the matt surface (a).
EN
2
90°
1
a
4
- 2 -
Fig. 2
115°
Fig. 3
Fig. 4