Care Instructions; Spare Parts - Renfert lay:art 1046 0000 Instrucciones Para El Servicio

4. Preparation for using the agate mixing palette
You have purchased a unique product.
Every agate mixing palette has its own indi-
vidual and natural grain or colouring, which
can differ slightly from the photo of the prod-
uct.
Natural stone palettes are susceptible to dis-
colouration, especially when mixing liquids
with an acid content are used.
An agate palette is a hand crafted, natural
product which can have divergencies in pal-
ette thickness from the production methods.
Due to this fact, we recommend using the
pre-assembled shorter rest plugs (9) on
thicker palettes. On thinner palettes, we
recommend exchanging the rest plugs with
the separately supplied taller rest plugs
(6, Fig. 1).
If the palette should still wobble slightly
when in position, please use the distance
discs (8) to level it out.

5. Care instructions

In order to maintain the consistent quality of the agate mixing palette, it is essential to
clean on a regular basis.
To clean, take the agate mixing palette out of the case base and brush under running
water, or clean carefully using a steam cleaner.
Clean the case using conventional detergent and then rinse thoroughly under running
water.
Do not clean using sharp edged, abrasive or solvent based materials.
Please only use soft brushes or cleaning cloths.
When using Tricolor stains it may happen that vaporized stains fluid etches the
plastic lid.
Do not clean the plastic lid with monomers or with liquids containing solvents!

6. Spare parts

1046 0100 Labelling foil S, 3 pcs.
9 1045 9991 Housing lay:art small
9 0003 0038 Case feet, 4 pcs.
9 1046 0001 Small part set lay:art natural (consisting of the Pos. 6, 8 and 9)
7. REACH
Information on REACH and SVHC is available on our website www.renfert.com, in the
Support area.
9
8
- 3 -
EN
Fig. 5
Subject to alteration
EN