Assembly - Bissell POWERFORCE HELIX TURBO REWIND PET 2692 Serie Guia Del Usuario

Assembly

WARNING
Do not plug in your vacuum until you are familiar with all instructions and operating procedures.
1
Place the Upper
Handle onto
the base and
push it down.
Then attach the
handle with the
2 screws that
are taped to
the handle in a
plastic bag.
4
Now wrap the
hose through
the Hose Clip
and connect
the hose wand
to the foot
hose down at
the bottom of
the vacuum.
7
Remove filter in unit and
replace with Febreze® filter.
Return Dirt Tank back onto
vacuum.
NOTE: The Febreze® filter must first be removed from the bag before inserting it into the
machine.
NOTE: The Crevice Tool can be found inside the Extension Wand. You can remove it to
use it and put it back to store it neatly out of your way when you're finished.
Febreze® and related trademarks are owned by The Procter & Gamble Company, Cincinnati, Ohio and used under license by BISSELL Homecare, Inc.
2
Next, insert the Wand
Base and turn it to the
left to lock it into place.
5
This unit includes a
Febreze® filter. To
replace the filter,
press the tank release
button and pull handle
to lift Dirt Tank away
from vacuum.
8
Put your accessory tools on the vacuum and
you're ready to go! NOTE: Pet Hair Corner Tool
does not store on unit
Extension Wand
(with Crevice Tool inside)
3
Next, insert the end of
the hose into the back of
the vacuum and twist to
lock it into place.
6
Open the
Dirt Tank lid
by lifting the
release latch
on the front.
Dusting Pet TurboEraser®
Brush
www.BISSELL.com
Tool
5