Lenco SPR-200 Manual Del Usuario página 8

TWS (True Wireless Stereo) Function:
With the TWS function you can combine 2 identical SPR-200 speakers as a wireless
stereo speaker set.
To do this:
1. Turn on the two Lenco SPR-200 speakers which you want to setup. Both have to
be in Bluetooth mode.
2. Press and hold the "PLAY/PAUSE" button (4) for about 4 seconds on one unit. The
speaker will show "BU" on the display. It will make a "di" sound 3 times when
pairing was successful.
3. Make a Bluetooth connection with your mobile phone/tablet/computer (if not
already made) to play music through the TWS paired Speakers.
4. When you want to exit the TWS mode, press and hold the "PLAY/PAUSE" button (4)
on one of the units for 4 seconds again to exit the TWS function. The speaker will
make a "di" sound 2 times and show "BT" on the display.
NOTE: the TWS function can only be used in Bluetooth mode.
REMARKS:
1. Press the MODE button to switch the different modes, the order is Bluetooth,
USB disk, Micro SD, FM radio and AUX-IN.
2. Turn off the unit while without use.
CHARGING:
1. The charger is not included in the accessories. Please use the universal 5V/1A
charger to charge this devices. Put the provided charge cable into the charging
jack, connect the other end to the charger, the charging indicator will keep
lighting.
2. Charge time should be 6 to 8 hours. When charging full, the indicator light will
switch off.
SPECIFICATION:
Bluetooth range:
Bluetooth version:
Speakers:
Connections:
Power supply:
Play time:
Recharge power:
Product size:
Guarantee
Lenco offers service and warranty in accordance to European law, which means that in case
of repairs (both during and after the warranty period) you should contact your local dealer.
up to 10 meters
4.2
Tweeter Size: 3 inch x 2
Subwoofer Size: 4 inch x 2
USB and Aux-in 3.5mm jack connection
Built-in rechargeable lithium battery 4400mAh, 7.4V
up to 14 hours (at 30% volume in USB mode)
DC 5V 1A (USB-to-micro USB charging cable included)
533(L)*178(W)*239(H)MM
8