Display Language; Local Area Code; Ringer Tone; Factory Default - GE 25898 Guia Del Usuario

D L
ISPLAY ANGUAGE
1. Press the flash/prog button on the handset until 1 ENG 2 FRA 3 ESP
shows in the display.
2. Use the CID-VOL (- or +) buttons on the handset or the handset touch-
tone pad to select 1, 2, or 3 .
3. Press the flash/prog button again.
NOTE: Press the *exit button once to keep the previous setting and return to
the standby screen.
L A C
OCAL REA
1. Press the flash/prog button until AREA CODE - - - shows in the display. The
default is - - -.
2. Use the handset touch-tone pad to enter the area code.
3. Press the flash/prog button again.
NOTE: Press the *exit button once to keep the previous setting and return to
the standby screen.
NOTE: To restore the default setting to - - - , press and release del/chan when
AREA CODE shows in the display.
R T
INGER ONE
1. Press the flash/prog button until RINGER TONE > 1 shows in the display.
The default ringer tone is 1 .
2. Use the CID-VOL (- or +) buttons on the handset or the handset touch-
tone pad to select 1, 2, or 3 .
3. Press the flash/prog button again. You will hear a confirmation tone.
NOTE: Press the *exit button once to keep the previous setting and return to
the standby screen.
F D
ACTORY EFAULT
As you become familiar with this system, you may prefer to use the
system's original settings. Follow the steps below to return to the factory
default settings.
1. Press the flash/prog button until DEFAULT shows in the display. The
default is NO .
ODE
15