Elephone Peration; Making A Call; Answering A Call; I N Use Indicator - GE 25898 Guia Del Usuario

2. Use the CID-VOL (- or +) buttons to select YES or NO .
3. Press the flash/prog button again. You will hear a confirmation tone.
NOTE : The default settings are ENGLISH, AREA CODE - - -, and RINGER
TONE 1.
NOTE : Press the *exit button once to keep the previous setting and return to
the standby screen.
T
ELEPHONE
M C
AKING A ALL
1. Pick up the handset, and press the talk/callback button.
2. When you hear a dial tone, dial a telephone number.
3. When finished, press the talk/callback button again to hang up.
OR
1. Dial the phone number first, then press the talk/callback button.
2. When finished, press the talk/callback button again to hang up.
NOTE: If you make a mistake press the del/chan button to backspace and
erase the wrong number(s).
A C
NSWERING A
1. Pick up the handset, and press the talk/callback button.
NOTE: The talk/callback button is disabled when the handset is in
the cradle.
2. When finished, place the handset back in the cradle, or press the talk/
callback button again.
IMPORTANT: Because cordless phones operate on electricity, you should
have at least one phone in your home that isn't cordless in the event of a
power failure.
I U I
N SE NDICATOR
When the handset is ON (in TALK mode), the talk/callback button lights up
when the handset is taken off-hook. The charge/in use indicator on the base is
lit. During an incoming call, the charge/in use indicator on the base and the
handset talk/callback button flashes.
16
O
PERATION
ALL