Analogue Programmer; Setting The Time; Starting The Oven; Programming Your Cooking - Hotpoint Ariston FZ 61.1 /HA Instrucciones De Uso

Analogue Programmer

Setting the time*

1. Press the PROGRAMMER knob and turn it in a
clockwise direction to set the correct time.
 The clock can only be set if the oven is connected to
the electricity mains. In the event of a power failure, the
PROGRAMMER will stop: the correct time will need to
be reset once the power has been restored.

Starting the oven*

1. Turn the PROGRAMMER knob in a clockwise
direction until the “'” symbol appears in the display
window.
2. Pull the PROGRAMMER knob and turn it in a
clockwise direction until the red pointer is aligned with
the current time. A click will indicate the end of the
programming phase.
3. Select the desired cooking mode using the
SELECTOR knob.
4. To switch the oven off, turn the SELECTOR knob
back to the "0" position.
Programming cooking*
Programming a cooking duration with immediate
start
1. Turn the PROGRAMMER knob in a clockwise
direction until the desired cooking duration appears in
the display window.
2. Select the desired cooking mode using the
SELECTOR knob. The oven switches on immediately
and remains in operation for the entire set cooking
duration.
3. When the selected time period has elapsed, a
buzzer will sound. To silence it, turn the
PROGRAMMER knob in a clockwise direction until the
“” symbol appears in the display window.
4. Turn the SELECTOR knob to the "0" position.
• .or example: it is 9:00 a.m. and a duration of 1 hour
and 15 minutes is programmed. The programme will
stop automatically at 10:15 a.m.
Programming a cooking duration with delayed
start
1. Turn the PROGRAMMER knob in a clockwise
direction until the “” symbol appears in the display
window.
2. Pull the PROGRAMMER knob and turn it in a
clockwise direction until the red pointer is aligned with
the desired cooking start time.
3. Turn the PROGRAMMER knob in a clockwise
direction until the desired cooking duration appears in
the display window.
4. Select the desired cooking mode using the
SELECTOR knob. The oven will switch on at the set
cooking start time and will remain on for the entire set
cooking duration.
5. When the selected time period has elapsed, a
buzzer will sound. To silence it, turn the
PROGRAMMER knob in a clockwise direction until the
“” symbol appears in the display window.
6. Turn the SELECTOR knob to the "0" position.
• .or example: it is 9:00 a.m., a time of 1 hour and 15
minutes is programmed and the start time is set to
11:00 a.m. The programme will start automatically at
11:00 and will end at 12:15.
 To cancel a programmed cooking cycle, turn the
PROGRAMMER knob in a clockwise direction until the
“'” symbol appears in the display window.
Only available in certain models.
*
GB
17