4: Turn on the Bluetooth function on your smart device and activate
Bluetooth device scanning.
5: Select "Lenco SBW-800" from the list of found devices.
6: if asked, enter the password "0000" and press OK.
7: When successfully paired with your device, the indicator light will
be lit continuously. You can use the remote control to control
music playback of the connected Bluetooth device.
(The operation range for the Bluetooth connection is ~10 meters)
Note: if a mobile phone, on which you are playing music receives a
call, the music will stop playing. When the call is ended, the
devices are connected to each other again and playback will
resume.
Removing a connected Bluetooth device
Press and hold the Bluetooth button (nr 3 in below picture) on the
soundbar for 3 seconds to disconnect the active Bluetooth device.
12