Lenco SBW-800 Manual Del Usuario página 17

The remote
control does not
work.
Subwoofer not
working
Specifications
Product name
Output power
AC/DC adaptor
Speaker frequency
Bluetooth version
Bluetooth range
Dimensions of soundbar
Dimensions of subwoofer
Weight of soundbar
Weight of subwoofer
Frequency range
This product specifications and design are subject to
change without notice!
Check if the batteries are drained and replace
with new batteries or the distance between the
remote control and the main unit is too far.
Move it closer to the unit.
Re-pair the soundbar with the subwoofer:
Turn on the soundbar then press and hold both
the Volume + and Volume – buttons and turn on
the subwoofer, the red LED on the Subwoofer
will flash 4 times. Unplug the AC adaptor from
the soundbar, wait a few seconds and then
replug the AC adapter. Keep the powerswitch of
the subwoofer in the 'on' position and turn on
the soundbar again to complete the re-pairing of
the soundbar and subwoofer.
SBW-800BK
20W*2+30w
100-240V~50/60Hz
50Hz-15KHz
5.0, A2DP, AVRCP
Up to 10m
810 x 92 x 93mm (WxHxD)
165 x 240 x 298mm (WxHxD)
1,44 kgs
2,17 kgs
500 – 980Mhz
16